Weatherby VCC653WR6O Vanguard Accuguard Bolt 6.5x300 Weatherby Mag 26" 3+1 Black w/Gray Webbing Fixed Monte Carlo w/Aluminum Bedding Synthetic Stock Stainless Steel Receiver

Weatherby's Vanguard rifles are guaranteed to shoot a 3-shot group of .99" or less at 100 yards (SUB-MOA) from a cold barrel when used with Weatherby factory or premium ammunition. Vanguard rifles are equipped with a match quality, two-stage trigger (adjustable down to 2.5 lbs.) and a 3-position safety, with the middle position allowing the shooter to work the action while safety is still engaged. The Vanguard action incorporates a one-piece machined bolt body, fluted for reduction in weight and bearing surface area, while eliminating binding for smooth action. Three gas ports allow high-pressure gases to escape laterally in the event of an accidental case rupture, and the massive M-16-style extractor ensures reliable and positive extraction. Vanguard rifles have a one-piece machined receiver featuring an integral recoil lug for the utmost in strength and structural integrity, along with a one-piece trigger guard with a hinged floorplate for easy access to unfired cartridges in the magazine. The Vanguard Accuguard model is designed for long range performance. The hand-laminated, raised comb Monte Carlo, composite stock has a full-length aluminum bedding block, matte gel coat finish, and spiderweb accents. The The 410 series stainless steel metalwork has a bead blasted matte finish, including the free-floated, fluted, cold hammer-forged barrel. This model has a 26" free-floated, cold hammer-forged barrel with a #3 contour.