OPF-G6, DPP Glock Gen 6 DPP plate

• OPF-G6, DPP is a heavy duty Glock Gen 6 ORS compatible plate for Leupold DPP (Delta Point Pro) and EOTech EFLX series of sights that use the DPP footprint. It has not been tested on other sights that use the DPP footprint, which can vary, we can only guarantee fit and function on DPP and EFLX sights we tested.
• Not all DPP footprint sights adhere to Leupold DPP dimensions. Vortex Defender (not CCW) sights are notably looser on OPF-G6, DPP than DPP and EFLX (which more faithfully follows Leupold DPP dimensions). The August batch of OPF-G6, DPP is only compatible with Leupold DPP and EOTech EFLX, the December batch will be compatible with Vortex Defender XT and ST.
• For OPF-G6 backup sights compatibility, please visit this page: OPF-G6 backup sights compatibility
• For DPP, sights with a front sight height of 0.407" at least is necessary.
• For EFLX and Defender, sights with a front sight height of 0.315" works but is very low, 0.350" and 0.385" are recommended.
• Glock Gen 6 ORS uses a polymer insert in leu of an adapter plate. OPF-G6, DPP does not. The elasticity meant to provide upward tension from its elasticity also applies to the lugs on the insert.

Our plates have never used or relied on upward tension to keep the plate-to-slide screws from loosening, we successfully use other means for the same end. With MOS, plate-to-slide screws are separate from sight-to-plate. With Gen 6 ORS, it's an insert with lugs, screws go through the RMR and DPP and directly thread into the slide. We don't want lugs to have elasticity or give, when that happens, the load is transferred to the screws, our plate is specifically designed to remove the load transfer to plate-to slide screws.

• OPF-G6, DPP has four lugs to support DPP's four lug holes. FCD DPP plates have always had four lugs, it's a bit tricky to do it on the Gen 6 ORS but we've never taken shortcuts, OPF-G6, DPP retains the 4 lug feature.