Monarch 7.62 V2 TI

<h2>Description</h2>

<h4><strong>Specs:</strong></h4>

<ul>

<li><strong>Material: Titanium</strong></li>

<li><strong>Method of Manufacturing</strong>: DMLS</li>

<li><strong>Weight</strong>: 10.9 oz</li>

<li><strong>Length</strong>: 7&Prime; (without a mount)</li>

<li><strong>Diameter</strong>: 1.75&Prime;</li>

<li><strong>Bore</strong>: .30 cal</li>

<li><strong>Finish</strong>: C Series Cerakote (Black, FDE, ODG, or RAW media blasted finish)</li>

<li>No mount is included, but we recommend closed tined flash hiders or brakes to be ran with our design. 3 prong flash hiders are not recommended as it diminishes performance based on our findings with in-house testing</li>

<li><strong>Barrel length restrictions</strong>: 10.5&rdquo; 5.56 &amp; similar cartridges, 10.5&rdquo; supersonic .300blk or 7.62&times;39, 5.5&Prime; .300blk subs, 16&rdquo; .308 and similar cartridges, 18&rdquo; .300 win Mag and larger magnum .30cals</li>

<li><strong>Full Auto Rating</strong>: 30 rounds per minute, after 90 rounds allow a 10 minute cool down period.&nbsp;</li>

</ul>

<h4><strong>Design Highlights:</strong></h4>

<ul>

<li>&ldquo;PFM&rdquo; Baffle Technology (Preferential Flow Management) is incredibly efficient in both flow regimes while maintaining minimal back pressure</li>

<li>Venting array helps direct sound away from the shooter and bystanders behind the muzzle</li>

<li>Incredible flash suppression for a high flow rate design</li>

<li>DMLS manufacturing method allows for design elements not seen in other technologies</li>

<li>Maintains suppression efficiency even on small calibers like 5.56</li>

<li>Integral DMLS printed flash hider end cap</li>

<li>Knurling design helps with removal/tightening of suppressor by hand</li>

<li>Wrench flats (1.5&Prime;) to help with install or removal of mounting system</li>

<li>1.375&times;24 HUB threads allows user to run mounting system of their choice</li>

<li>Intended cartridges: .300 BLK, 7.62x39mm, .308 win, 5.56. (.30 cal and smaller)</li>

</ul>

<p>&nbsp;</p>

<p><strong><em>MONARCH 7.62 Ti USERS MANUAL (Included in the box as well)&nbsp;</em></strong></p>

<p><strong><em>Mounts:</em></strong><em>&nbsp;All 1.375&times;24 RH TPI Mounts will work. Distance from shoulder to blast baffle is 1.59&rdquo;. Please check mount and can with an alignment rod while mounted to an empty/unloaded rifle.</em></p>

<p><strong><em>Cleaning:</em></strong><em>&nbsp;We recommend the Monarch 7.62 be cleaned in an ultrasonic cleaner with a Cerakote safe solution every 5000-10,000 rounds or when you feel performance has been reduced. We can do this for a flat fee. See website.</em></p>

<p><strong><em>Warranty:</em></strong><em>&nbsp;If it is our fault, we will take care of you at no expense. If it is your fault, it will be on a case by case basis and up to our discretion. If it is due to gross negligence you will be covering the cost of the repair.&nbsp;</em></p>